Place heating can be provided by an electrical heater in great rooms that need a small extra increase. To use these heaters successfully, you you must know be aware of the wattage just how many watts you need to heat the space and they attract. If you donât know the wattage of your heater, there are methods to find out this crucial little bit of information.
Look on the baseboard heater to get a manufacturerâs label listing the electrical needs of the heater. In the event the wattage is included by the label, use that value. In the event the label lists amperage and voltage but maybe not watts, it is possible to get the wattage by multiplying the volts. As an example, in the event the heater draws 8 amps at 120 volts, multi-ply 120 by 8 to get 960 watts.
Estimate the heaterâs wattage by measuring the amount of the heater in toes, in the event the electrical label on the heater is inaccessible, unreadable or missing. Electric baseboard heaters on common need 225 watts-per foot. The heater size to estimate wattage. In case your heater is 4 ½ feet long, multi-ply 4.5 by 225 to reach approximately 1,012 watts. This method works for both 120-volt and 240-volt heaters.
Figure the wattage you need to heat the space. Multiply the length in feet by the width in feet to get the ground area. The ground area by 10 to get the heater wattage required for the space. For instance, a space 1-0-by-10-feet has a ground area of 100 square-feet. Multiply 100 by 1 to get 1000 watts. This is the electrical base Board heater strength required to heat the space.