You’ll have more control over your ceiling fan and lights when they can be switched separately. But if you’re determined to to manage them on one swap, despite the fact that you’ll not be in a position to to manage its velocity or the enthusiast independently, it is possible to do. A simple method called pigtailing enables one to join the wires required in the change box. Your simple wiring skills are augmented by learning the best way to pigtail. For those who have doubts about your capacity to finish the project, have a certified electrician examine work instantly upon completion or perform the career.

Turn off the circuit breaker controlling the circuit to their switch, the mild as well as the ceiling fan. Remove the switch cover by unscrewing its tiny screw. Double-check which you have cut the electricity off properly by keeping a non-contact circuit tester of the wiring in the change within 1-inch or so. The absence of lights on the tester or chirps means it’s safe to continue.

Unscrew the change in bottom and the top in the ears on the change box, and pull its wires that are connected and it, bringing electricity from the change box, in the circuit breaker. Remove the wires connected to the change pressing a screw-driver in a slot to produce them in the push or by unscrewing them from a final screw -in holes. If these were were early in the day wrapped round the terminal screw straighten with pliers the stripped ends of the wires.

Cut from a scrap bit of cable matching the gauge of the current circuit A6-inch size of wire that is white and black, and a un-insulated neutral wire. Strip 3/4 inch of insulation from each wire conclusion with a tool, multi purpose wire stripper or being cautious to encircle, minimize and push-off insulation without the nicking the copper-wire underneath.

Create a four-wire pig-tail splice by li-ning up the stripped ends of the black pig-tail with these of the black wire transporting electricity from your circuit breaker as well as the black wires heading to the enthusiast as well as the mild, which exit the swap box via an upper knock-out hole.

Twist clock-wise having an established of pliers the wires that are grouped. By tugging on each wire test the bodily relationship. Untwist if any are unfastened, and re-twist. A twist-on wire connector clock-wise onto the wire ends. Repeat for the neutral and white wires.

Screw or drive the pig-tails to the suitable connectors on the swap — black to the “hot” connector and white to the remaining connector. Screw the pig-tail that is neutral to the screw about the corner of the swap.

Fold the pig-tails and linked wires neatly to the swap box. Reattach the swap to the ears of the change protect along with the box. Flip on the circuit-breaker, and turnon the swap to check if individual light and the ceiling enthusiast function. Troubleshoot any issues by checking the change and turning off the circuit-breaker. Tug on the wires searching for just about any loose types, or re-place the change to remove the difficulty.